Browse SanCo Capabilities
Each tile below goes to a real pillar page (never an image). Pick a category, review the capability, then send a fast RFQ when you’re ready. If you’re unsure which process wins, send the print anyway—we’ll point you to the smartest path.
Coverage: Texas (DFW/Austin/San Antonio/Houston) • Oklahoma • Arkansas • Domestic + Overseas options.
Pick a Category — Then RFQ
Clean, consistent tiles. No floating pill bars. Everything routes to a real page.
Metal Stampings
PPAP / at-rateProgressive & transfer dies, in-die sensing, finishing, and control plans so parts run clean at rate and fit downstream assemblies.
Castings
Near-net + machineSand & investment castings with machining/finishing coordinated so first articles match intent and production stays stable.
Forgings
Strength / grainClosed/open-die forgings, rolled rings, shafts—heat treat + post-forge machining routed to final datums and inspection.
Machining
Datums alignedCNC turning/milling/Swiss/grinding with inspection aligned early so FAIs don’t become a firefight.
Sheet & Steel Fabrication
Laser / weldLaser, brake, hardware, weld, and finishing—from prototype to structural frames with clean pack-out.
Aluminum Extrusions
6063/6061Profiles with cut/cope/drill, anodize or powder, and kitting—clean cosmetics and repeatable length control.
Wire Harnesses
UL / IPCLabeled, tested, and packaged to be line-ready. Overmold as needed. Domestic + overseas options.
LED Display Lighting
Kitted installsDisplay & architectural lighting with extruded housings, harnessing, and labeled kits for clean installs.
Powder Metal
RepeatabilityPM materials & densities for uniform walls and consistent outputs; machining planned where function demands it.
Overseas Sourcing
PPV + controlCost leverage with U.S. coordination. Incoterms, documentation, inspection scope, and program-level quality plans.
Send the Print — We’ll Route It Fast
Tell us the category (stamping/casting/forging/machining/fab/etc), material, annual volumes, finish, inspection scope, and your target date. If you’re unsure on process, say that—we’ll recommend the best route and why.
Tip: If only a few features are truly critical, call them out. Opening up non-critical tolerances often cuts cost dramatically.